products
HomeWhat should we pay attention to when using the fiber laser tube cutting machine?

What should we pay attention to when using the fiber laser tube cutting machine?

Publish Time: 2024-08-29
In the process of using the fiber laser tube cutting machine, you need to pay attention to the following points:

1. Preparation before operation

Environmental inspection:

Ensure that the equipment is installed in a dry and well-ventilated environment to avoid damage to the equipment caused by moisture and high temperature.

Check whether there are flammable and explosive items in the surrounding environment and keep a sufficient safe distance.

Equipment inspection:

Check whether the various components of the fiber laser tube cutting machine are intact, such as the laser, cutting head, guide rail, transmission system, etc.

Confirm that the cooling system and gas supply system of the equipment are operating normally to ensure that the operating temperature of the laser is within the appropriate range.

Check the specifications and quality of the cutting material to ensure that it meets the processing requirements of the equipment.

2. Precautions during operation

Safety protection:

The operator must wear appropriate protective glasses to prevent laser damage to the eyes.

Wear protective clothing to avoid laser damage to the skin.

During the operation of the equipment, it is strictly forbidden to open the protective door of the equipment to prevent laser leakage.

Operation specification:

Operate strictly in accordance with the operation manual of the equipment, and do not change the parameters and settings of the equipment at will.

Before cutting, make a trial cut and adjust the cutting parameters to ensure the cutting quality.

Pay attention to the distance between the cutting head and the cutting material to avoid collision and damage to the cutting head.

For pipes of different materials and thicknesses, choose appropriate cutting parameters to obtain the best cutting effect.

Equipment maintenance:

Clean and maintain the equipment regularly to keep the equipment clean and in good working condition.

Check the optical path system of the equipment to ensure that the optical path is unobstructed and free of dust and debris.

Check the cooling system of the equipment regularly to ensure the quality and flow of the coolant are normal.

Pay attention to the operating status of the equipment. If any abnormality is found, stop the operation immediately and check and repair it.

3. Post-operation processing

Equipment shutdown:

After the cutting work is completed, turn off the laser first, wait for a while before turning off the power of the equipment.

Clean up the cutting waste and debris around the equipment to keep the working environment clean.

Equipment maintenance:

Perform daily maintenance and maintenance on the equipment, such as cleaning the optical path system, checking the cooling system, etc.

Regularly conduct a comprehensive inspection and repair of the equipment to ensure the performance and accuracy of the equipment.

In short, when using the fiber laser tube cutting machine, you must strictly abide by the operating procedures, pay attention to safety protection, and regularly perform equipment maintenance and maintenance to ensure the normal operation of the equipment and cutting quality.
×

Contact Us

captcha